Mobile Workstation With Light Fitting

Mobile Workstation With Light Fitting – REF 2017-01-13269

The Mobile Workstation has been designed for a major international aerospace OEM. The solution is a variant of the Mobile Workstation that features a 4ft LED strip light. The mobile workstation provides a flexible working solution which can be easily manoeuvred into different locations to suit changing business requirements. The solution will allow operators to use a laptop and store paperwork. The Plywood backboard allows the future addition of either shadow boards or wipe boards if required.

The mobile workstation framework has been manufactured from 30mm box section with an 18mm Plywood work surface and backboard. Below this a mid shelf has been included also from 18mm Plywood. Outer panels have been manufactured from 2mm thick black HDPE.

The work surface features 2 circular cut outs approx. 100mm diameter for laptop and printer cables. These holes have be positioned approx. 600mm from each end.

The solution features an extension lead mounted to the bottom shelf with a 100mm diameter hole in the back centre of the back panel in line with the shelf. Extension Specification: 4 Socket Extension Lead, White, 2m, Surge Protected, Switched and Wall Mountable

Castor specification: Pressed steel swivel castor with top plate fixing fitted with a blue 75 shore A elastic rubber tyre on a nylon centred wheel with a roller bearing and swivel wheel brake. Wheel diameter 125mm, tread width 35mm, overall height 156mm, top plate 105mm x 80mm, hole centres 80mm x 60mm. Load capacity 200kgs.

The trolley has been powder coat finished in light grey to give a hard wearing durable finish.

Approximate Size:
2400mm (W) x 800mm (D) x 900mm (O/A H – Work surface) / 1500mm (O/A H Backboard).

Quantity required –4 off

Acres Reference – AD-1240-2017-02